View FTM-6101C-SL13051G_1764776.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

fiberxon proprietary and confidenti al, do not copy or distribute page 1 of 11 features ? 155mbps data-rate ? 1510nm uncooled dfb laser and apd photodetector for 130km transmission ? digital diagnostic monitor interface compatible with sff-8472 ? extend rx power monitoring range to -45~-8dbm with +/-3db monitoring precision which exceeds sff-8472's -40dbm(min); measured rx optical power and rx power alarm & warning thresholds in dbm . ? sfp msa package with duplex lc connector ? with spring latch for easily removing ? +3.3v single power supply ? operating case temperature: 0 to +70c applications ? osc for cwdm or dwdm systems ? other optical links standard ? compatible with sfp msa ? compatible with sff-8472 rev 9.5 ? refer to itu-t g.957 and g.958 ? refer to telcordia gr-253-core ? compatible with fcc 47 cfr part 15, class b ? compatible with fda 21 cfr 1040.10 and 1040.11, class i ? compliant with rohs description FTM-6101C-SL13051G 155mbps spring-latch sfp transceiver is high perfor mance, cost effective module that supports data-rate of 155mbps and transmission distance up to 130km. it is specially designed for osc (optical supervisory channel) in cwdm or dwdm systems. the transceiver consists of two sections: the transmitter section incorporates uncooled dfb laser, and the receiver section consists of apd photodiode integrated with a trans-impedance preamplifier (tia). all modules satisfy class i laser safety requirements. the optical output can be disabled by a ttl logic high-level input of tx disable. tx fault is provided to indicate degradation of the laser. loss of signal (los) output is provided to indicate the loss of an input optical signal of receiver. an enhanced digital diagnostic monitoring interface compatible with sff-8472 has been incorporated into the transceivers. for further information, please refer to sff-8472 rev 9.5. FTM-6101C-SL13051G is compliant with rohs. may, 25, 2007 members of flexon tm family (with monitoring function, for 130km transmission) 155mbps spring-latch sfp transceiver
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 2 of 11 regulatory compliance the transceivers have been tested according to amer ican and european product safety and electromagnetic compatibility regulations (see table 1). for further inform ation regarding regulatory certification, please refer to fiberxon regulatory specification and safety guidelines, or contact with fiberxon, inc. america sales office listed at the end of the documentation. table 1- regulatory compliance feature standard performance electrostatic discharge (esd) to the electrical pins mil-std-883e method 3015.7 class 2(>2000 v) electrostatic discharge (esd) to the duplex lc receptacle iec 61000-4-2 gr-1089-core compatible with standards electromagnetic interference (emi) fcc part 15 class b en55022 class b (cispr 22b) vcci class b compatible with standards immunity iec 61000-4-3 compatible with standards laser eye safety fda 21cfr 1040.10 and 1040.11 en60950, en (iec) 60825-1,2 compatible with class 1 laser product. component recognition ul and csa compatible with standards rohs 2002/95/ec 4.1&4.2 2005/747/ec compliant with standards note note: in light of item 5 in annex of 2002/95/ec, ?pb in t he glass of cathode ray tubes, electronic components and fluorescent tubes.? and item 13 in annex of 2005/747/ec, ?lead and cadmium in optical and filter glass.?, the two exemptions are being concerned for fiberxon?s transce ivers, because fiberxon?s transceivers use glass, which may contain pb, for components such as lenses, wi ndows, isolators, and other electronic components. absolute maximum ratings stress in excess of the maximum absolute ratings can cause permanent damage to the module . table 2 - absolute maximum ratings parameter symbol min. max. unit storage temperature t s -40 +85 c supply voltage v cc -0.5 3.6 v operating relative humidity - 5 95 % recommended operating conditions table 3- recommended operating conditions parameter symbol min. typical max. unit operating case temperature t c 0 +70 c
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 3 of 11 power supply voltage v cc 3.13 3.47 v power supply current i cc 300 ma data rate 155 mbps FTM-6101C-SL13051G (1510nm dfb and apd, 130km, monitoring function) table 4 - optical and electrical characteristics parameter symbol min. typical max. unit notes transmitter centre wavelength c 1500 1510 1520 nm average output power p 0ut +0.5 +5 dbm 1 spectral width (-20db) ? 1 nm side mode suppression ratio smsr 30 db extinction ratio ex 10 db jitter generation (rms) 0.01 ui jitter generation (pk- pk) 0.1 ui output optical eye compatible with telcordia gr-253-core and itu-t g.957 2 data input swing differential v in 500 2400 mv 3 input differential impedance z in 90 100 110 ? disable 2.0 vcc v tx disable enable 0 0.8 v fault 2.0 vcc+0.3 v tx fault normal 0 0.8 v receiver centre wavelength c 1260 1580 nm receiver sensitivity -42 dbm 4 receiver overload -8 dbm los de-assert los d -43 dbm los assert los a -55 dbm los hysteresis 1 4 db data output swing differential v out 370 2000 mv 5 high 2.0 vcc+0.3 v los low 0 0.8 v notes: 1. the optical power is launched into smf. 2. measured with a prbs 2 23 -1 test pattern @155mbps. 3. internally ac coupled and terminated. 4. measured with a prbs 2 23 -1 test pattern @155mbps, ber 1 10 -10 . 5. internally ac coupled. eeprom information
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 4 of 11 the sfp msa defines a 256-byte memory map in ee prom describing the transceiver?s capabilities, standard interfaces, manufacturer, and other information, wh ich is accessible over a 2 wire serial interface at the 8-bit address 1010000x (a0h). the memory contents refer to table 5. table 5 - eeprom serial id memory contents (a0h) addr. field size (bytes) name of field hex description 0 1 identifier 03 sfp 1 1 ext. identifier 04 mod4 2 1 connector 07 lc 3?10 8 transceiver 00 08 04 00 00 00 00 00 oc 3, single mode long reach 11 1 encoding 03 nrz 12 1 br, nominal 02 155mbps 13 1 reserved 00 14 1 length (9um)-km 82 130km 15 1 length (9um) ff 130km 16 1 length (50um) 00 17 1 length (62.5um) 00 18 1 length (copper) 00 19 1 reserved 00 20?35 16 vendor name 46 49 42 45 52 58 4f 4e 20 49 4e 43 2e 20 20 20 ?fiberxon inc. ?(asc ) 36 1 reserved 00 37?39 3 vendor oui 00 00 00 40?55 16 vendor pn 36 31 30 31 43 2d 53 4c 31 33 30 35 31 47 20 20 ?FTM-6101C-SL13051G ? (asc ) 56?59 4 vendor rev 31 30 20 20 asc ( ?31 30 20 20? means 1.0 revision) 60-61 2 wavelength 05 e6 1510nm 62 1 reserved 00 63 1 cc base xx check sum of bytes 0 - 62 64?65 2 options 00 1a los, tx_fault and tx_disable 66 1 br, max 00 67 1 br, min 00 68?83 16 vendor sn xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx asc . 84?91 8 vendor date codexx xx xx xx xx xx 20 20 year (2 bytes), month (2 bytes), day (2 bytes) 92 1 diagnostic type 58 diagnostics(ext.cal) 93 1 enhanced option f0 optional alarm/warning flag, optional soft rx_los mornitoring and optional soft tx_fault mornitoring, optional soft tx_disable control and monitoring implemented 94 1 sff-8472 02 diagnostics (sff-8472 rev 9.4) 95 1 cc ext xx check sum of bytes 64 - 94
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 5 of 11 96?255 160 vendor specific note: the ?xx? byte should be filled in according to prac tical case. for more information, please refer to the related document of sff-8472 rev 9.5. table 6- alarm and warning thresholds (2-wire address a2h) name low threshold high threshold unit temperature alarm -5 90 o c temperature warning 0 80 o c voltage alarm 2.97 3.63 v voltage waring 3.1 3.5 v bias alarm 3 80 ma bias warning 4 70 ma tx power alarm -0.5 6 dbm tx power warning 0.5 5 dbm rx power alarm -46 -6 dbm rx power warning -45 -7 dbm monitoring specification the digital diagnostic monitoring interface also defines another 256-byte memory map in eeprom, which makes use of the 8 bit address 1010 001x (a2h). please see figure 1. for detail eeprom information, please refer to the related document of sff-8472 rev 9. 5. the monitoring specification of this product is described in table 7. figure 1, eeprom memory map specific data field descriptions table 7- monitoring specification
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 6 of 11 parameter range accuracy calibration temperature -10 to 80c 3c external voltage 3.0 to 3.6v 3% external bias current 0 to 100ma 10% external tx power 0 to +5 dbm 3db external rx power -45 to ?8 dbm 3db external measured rx optical power and rx power alarm & warning thresholds in dbm (unit) represented as a 16 bit signed twos complement value in increments of 1/256 dbm. table 8 and table 9 below illustrate the 16 bit si gned twos complement format used for rx optical power reporting. the most significant bit (d7) represents the sign, whic h is zero for positive rx optical power and one for negative rx optical power. table 8- bit weights (dbm) for rx optical power reporting registers higher byte(a2[104]) lower byte(a2[105]) d7 d6 d5 d4 d3 d2 d1 d0 d7 d6 d5 d4 d3 d2 d1 d0 sign 64 32 16 8 4 2 1 1/2 1/4 1/8 1/16 1/32 1/64 1/128 1/256 table 9- rx optical power format rx power binary hexadecimal decimal(dbm) fraction high byte low byte high byte low byte +127.996 +127 255/256 01111111 11111111 7f ff +125.000 +125 01111101 00000000 7d 00 +1.004 +1 1/256 00000001 00000001 01 01 +0.996 +255/256 00000000 11111111 00 ff 0.000 0 00000000 00000000 00 00 -0.004 -1/256 11111111 11111111 ff ff -1.000 -1 11111111 00000000 ff 00 -25.000 -25 11100111 00000000 e7 00 -40.000 -40 11011000 00000000 d8 00 -127.996 -127 255/256 10000000 00000001 80 01 -128 -128 10000000 00000000 80 00 the rx power alarm & warning thresholds (addr ess32-39@a2h)are also defined as the rx power method above. recommended host board power supply circuit figure 2 shows the recommended ho st board power supply circuit.
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 7 of 11 figure 2, recommended host board power supply circuit recommended interface circuit figure 3 shows the recommended interface circuit. figure 3, recommended interface circuit pin definitions figure 4 below shows the pin numbering of sfp electrical interface. the pin functions are described in table 10 with some accompanying notes.
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 8 of 11 pin 10 pin 1 pin 11 pin 20 bottom view of board of board top view figure 4, pin view table 10 - pin function definitions pin no. name function plug seq. notes 1 veet transmitter ground 1 2 tx fault transmitter fault indication 3 note 1 3 tx disable transmitter disable 3 note 2 4 mod-def2 module definition 2 3 note 3 5 mod-def1 module definition 1 3 note 3 6 mod-def0 module definition 0 3 note 3 7 rate select not connected 3 8 los loss of signal 3 note 4 9 veer receiver ground 1 10 veer receiver ground 1 11 veer receiver ground 1 12 rd- inv. received data out 3 note 5 13 rd+ received data out 3 note 5 14 veer receiver ground 1 15 vccr receiver power 2 16 vcct transmitter power 2 17 veet transmitter ground 1 18 td+ transmit data in 3 note 6 19 td- inv. transmit data in 3 note 6 20 veet transmitter ground 1 notes : 1. tx fault is an open collector output, which should be pulled up with a 4.7k~10k ? resistor on the host board to a voltage between 2.0v and vcc+0.3v. logic 0 indicates normal operation; logic 1 indicates a laser fault of some kind. in the low state, the output will be pulled to less than 0.8v. 2. tx disable is an input that is used to shut down the transmitter optical output. it is pulled up within the module with a 4.7k~10k ? resistor. its states are: low (0~0.8v): transmitter on (>0.8v, <2.0v): undefined high (2.0~3.465v): transmitter disabled
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 9 of 11 open: transmitter disabled 3. mod-def 0,1,2 are the module definition pi ns. they should be pulled up with a 4.7k~10k ? resistor on the host board. the pull-up voltage shall be vcct or vccr. mod-def 0 is grounded by the module to indicate that the module is present mod-def 1 is the clock line of two wires serial interface for serial id mod-def 2 is the data line of two wires serial interface for serial id 4. los is an open collector output, which should be pulled up with a 4.7k~10k ? resistor on the host board to a voltage between 2.0v and vcc+0.3v. logic 0 indicates normal operation; logic 1 indicates loss of signal. in the low state, the output will be pulled to less than 0.8v. 5. these are the differential receiver output. they are internally ac-coupled 100 ? differential lines which should be terminated with 100 ? (differential) at the user serdes. 6. these are the differential transmitter inputs . they are ac-coupled, differential lines with 100 ? differential termination inside the module. mechanical design diagram the mechanical design diagram is shown in figure 5. figure 5, mechanical design diagram of the sfp with spring latch ordering information
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 10 of 11 part no. product description FTM-6101C-SL13051G 1510nm, 155mbps, 130km transmission, sfp with spring latch, monitoring function, 0c~+70c,rohs compliance related documents for further information, please refer to the following documents: fiberxon sfp application notes sfp multi-source agreement (msa) sff-8472 rev 9.5 obtaining document you can visit our website: http://www.fiberxon.com or contact fiberxon, inc. america sales office list ed at the end of the document ation to get the latest documents. revision history revision initiate review approve subject release date rev. 1a solaris.zhu monica.wei walker.wei initial datasheet may 25, 2007 ? copyright fiberxon inc. 2007 all rights reserved. all information contained in this document is subject to change without notice. the products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. the information contained in this document does not af fect or change fiberxon?s product specifications or warranties. nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of fiberxon or third parties. all information contained in this document was obtained in specific environments, and is presented as an illu stration. the results obtained in other operating environment may vary.
155mbps spring-latch sfp transceiver 130 km transmission with monitoring function preliminary datasheet may, 25, 2007 fiberxon proprietary and confidenti al, do not copy or distribute page 11 of 11 the information contained in th is document is provided on an ?as is? basis. in no event will fiberxon be liable for damages arising directly from any use of the information contained in this document. contact u.s.a. headquarter: 5201 great america parkway, suite 340 santa clara, ca 95054 u. s. a. tel: 408-562-6288 fax: 408-562-6289 or visit our website: http://www.fiberxon.com

▲Up To Search▲

Price & Availability of FTM-6101C-SL13051G

	To Download FTM-6101C-SL13051G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .